Features
・ Memory Function（Six different lengths can be memorized）
・ Programing Function
(Six different lengths can be programmed to cut)
・ Possible to cut two roll tapes at the same time
due to Dual Photo Sensor
・ Tape Support to position a cut piece of tape for easy to take
・ Set a tape without using bobbin
・ Possible to cut non-adhesive tapes
・ Build-in Separator for cutting two rolls tape, Guide Plate,
Specific cations:
tape length: 5-999mm
folding lenght: 7mm
tape width: 6-60mm
Max. outer diameter of roll: 300mm
tape thickness: 0.05-0.3mm
usable tape: Craft, PP, Vinyl, Filament, Glass Cloth, Double-Sided, Strapping,
Protective Film, Aluminum Foil, and Others
Feeding Speed: 220 mm/sec ・Approximately 50pcs/min. (in the case of cutting 100mm with craft tape)
Accessories: Separator・Blade Oil・Guide Plate・Power Cord
Rated Voltage: AC 100 V～240 V 50Hz/60Hz 25W Fuse2A(AC inlet Build-in)
Dimension: 116 mm（W）×148 mm（H）×223 mm（D）
Weight: 1.6kg.
＊Some of usable tapes may not cut as depends on the material and tape brand.
＊Cutting length may be beyond cutting tolerance as depends on the type of tapes.
＊Specifi cations are subject to change without prior notice.
